Ip Igmp Immediate-Leave - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip igmp immediate-leave

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip igmp immediate-leave
Command introduced before JunosE Release 7.1.0.
Removes an interface immediately when the router receives an leave group membership
message from the host associated with this interface. The no version restores the default
situation, in which the router issues query messages to multicast groups and removes
an interface if the associated host does not return a group membership report within a
certain length of time.
CAUTION: Issue this command only on IGMPv2 interfaces to which one IGMP
client is connected. Do not issue this command to interfaces to which more
than one IGMP client is connected.
Interface Configuration, Profile Configuration
Chapter 10: I Commands
817