Mpls Statistics Label - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls statistics label

Syntax
Release Information
Description
Options
Mode
1412
[ no ] mpls statistics label { interface interfaceName atm vpi vci | labelValue }
Command introduced in JunosE Release 7.1.0.
Enables statistics collection for MPLS in labels. By default, statistics are enabled for in
labels depending on the protocol that added the in label to the MPLS forwarding table.
Statistics are not stored in NVS. The no version disables statistics collection.
interfaceName—Name of interface for label in interface label space on an ATM AAL5
interface; up to 15 alphanumeric characters
vpi—Virtual path identifier for a label, a value in the range 0–255
vci—Virtual circuit identifier for a label, a value in the range 33–65535
labelValue—Integer identifying a label in the platform label space, a value in the range
16–1048575
Global Configuration
Copyright © 2010, Juniper Networks, Inc.