Forward Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

forward interface

Syntax
Release Information
Description
Options
Mode
Related
Documentation
630
[ no ] [ suspend ] forward [ interface interfaceType interfaceSpecifier
[ next-hop nextHop [ ignore-default-route ] ] [ order orderValue ] ]
Command introduced before JunosE Release 7.1.0.
Defines a rule to forward all packets that match the current classifier control list. The no
version removes the rule from the policy list; the suspend version temporarily suspends
the forward rule; the no suspend version resumes application of a suspended rule.
NOTE: The forward interface command replaces the next-interface
command, which may be removed completely in a future release.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
nextHop—Next-hop IP address
ignore-default-route—Ignores the default route as a consideration for the next hop
orderValue—Order of this forward rule within the single classifier; in the range 1–32767;
default value is 100
Classifier Group Configuration
Assigning Values to the ATM CLP Bit
Copyright © 2010, Juniper Networks, Inc.