Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual page 773

ip
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip { permit | deny }
no ip
Command introduced before JunosE Release 7.1.0.
Modifies the subscriber policy for IP to define whether the subscriber (client) interfaces
that belong to a bridge group or to a VPLS instance forward (permit) or filter (deny) IP
packets. The no version restores the default value, permit IP packets.
You cannot change the default subscriber policy values for trunk (server) interfaces that
belong to a bridge group or to a VPLS instance. You also cannot change the default
subscriber policy values for a VPLS virtual core interface, which acts as a trunk interface.
The VPLS virtual core interface represents all of the MPLS tunnels from the router to the
remote VPLS edge (VE) devices.
permit—Specifies that the subscriber interface associated with the bridge group or
VPLS instance forwards IP packets
deny—Specifies that the subscriber interface associated with the bridge group or VPLS
instance filters IP packets
Subscriber Policy Configuration
Chapter 10: I Commands
729