Clock Summer-Time Date - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

clock summer-time date

Syntax
Release Information
Description
Options
Mode
434
clock summer-time name date { startDay startMonth | startMonth startDay }
startYear startTime { stopDay stopMonth | stopMonth stopDay }
stopYear stopTime [ dstOffset ]
no clock summer-time
Command introduced before JunosE Release 7.1.0.
Sets the router to automatically switch to summer time (Daylight Saving Time—DST).
It should start on the first specific date listed in the command and end on the second
specific date in the command. The no version configures the software so that it does not
automatically switch to summer time.
name—Name of the time zone (for example, PDT) to be displayed when daylight saving
(summer) time is in effect
date—Indicates that summer time should start on the first specific date listed in the
command and end on the second specific date in the command
startDay—DST start day (1–31)
startMonth—DST start month (January, February, ...)
startYear—DST start year (2000, 2001, ...)
startTime—DST start time (24-hour format) in hours and minutes (hh:mm)
stopDay—DST stop day
stopMonth—DST stop month
stopYear—DST stop year
stopTime—DST stop time (24-hour format)
dstOffset—Number of minutes to add during summer time in the range 1–1440; default
= 60
Global Configuration
Copyright © 2010, Juniper Networks, Inc.