Green-Mark - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

green-mark

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] green-mark colorMarkValue
Command introduced in JunosE Release 7.2.0.
Applies ToS mark value to green packets, which can be from policy actions, earlier policies,
or rate-limit hierarchies. The no version deletes the ToS mark value.
colorMarkValue—Value of the ToS mark to be applied: in the range 0–255
Color Mark Profile Configuration
Hierarchical Rate Limits Overview
Policy Rule Precedence
Chapter 8: G Commands
667