Ip Nat Translation Max-Entries - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip nat translation max-entries

Syntax
Release Information
Description
Options
Mode
872
ip nat translation max-entries maximumEntryNumber
no ip nat translation max-entries
Command introduced before JunosE Release 7.1.0.
Specifies the maximum number of translation entries per virtual router (that is, address
bindings, not translation rules) that the translation table can contain in global
configuration mode. The no version removes the configured limit.
maximumEntryNumber—Maximum number of translation entries in the current virtual
router; default value is no limit
Global Configuration
Copyright © 2010, Juniper Networks, Inc.