Color-Aware - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

color-aware

Syntax
Release Information
Description
Mode
Related
Documentation
438
[ no ] color-aware
Command introduced in JunosE Release 7.2.0.
Configures rate-limit profile to operate in color-aware mode. (Supported only on
hierarchical rate limits.) Color-aware rate limits can change the algorithm used depending
on the color of the incoming packet, which might have been set in the previous rate limit,
in a policy action, or in an earlier policy. The no version restores the default value, which
is not color-aware.
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Copyright © 2010, Juniper Networks, Inc.