Conformed-Action - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

conformed-action

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
For IP and IPv6 rate-limit profiles:
[ no ] conformed-action { drop | transmit | mark markVal }
For L2TP rate-limit profiles:
[ no ] conformed-action { drop | transmit }
For MPLS rate-limit profiles:
[ no ] conformed-action { drop | transmit | mark-exp expValue }
For hierarchical rate-limit profiles:
[ no ] conformed-action { drop | transmit [ conditional | unconditional | final ] }
Command introduced before JunosE Release 7.1.0.
Sets the action for packets not conforming to the committed rate and committed burst
size, but conforming to the peak rate and peak burst size for a rate-limit profile. The no
version restores the value to the default value, drop.
drop—Drops the packet
transmit—Transmits the packet; for hierarchical rate limits:
conditional—Packets must pass the next rate limit
unconditional—Packets take resources, but are not affected by the rest of the
hierarchy
final—Packets exit the hierarchy at rate limit
markVal—Value in the range 0–255
expValue—EXP bit value in the range 0–7
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Chapter 4: C Commands
449