JunosE 11.3.x Command Reference Guide A to M
mpls lsp retries
Syntax
Release Information
Description
Options
Mode
1378
mpls lsp retries retryNum
no mpls lsp retries
Command introduced before JunosE Release 7.1.0.
Specifies the number of attempts that will be made to set up an LSP for RSVP-TE after
a failure other than one due to no available route. The no version restores the default
value, 0, which means the attempts will be made until successful.
retryNum—Number of retry attempts in the range 0–65535
Global Configuration
Copyright © 2010, Juniper Networks, Inc.