Member-Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

member-interface

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] member-interface interfaceType interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Adds a member interface, also known as a bundle member, to an MLPPP bundle, an
MLFR bundle, or an IEEE 802.3ad link aggregation group (LAG) bundle. The no version
removes the specified member interface from the bundle.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
serial (MLFR bundle or MLPPP bundle)
pos (MLFR bundle only)
fastEthernet (IEEE 802.3ad LAG bundle only)
gigabitEthernet (IEEE 802.3ad LAG bundle only)
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Interface Configuration, Subinterface Configuration
Chapter 13: M Commands
1305