Mroute Port Admission-Bandwidth-Limit - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mroute port admission-bandwidth-limit

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mroute port portNumber admission-bandwidth-limit limitValue
[ priority-bandwidth-limit priorityBandwidthValue ] [ hysteresis hysteresisValue ]
no mroute port portNumber admission-bandwidth-limit
Command introduced in JunosE Release 7.1.0.
hysteresis and priority-bandwidth limit keywords and hysteresisValue and
priorityBandwidthValue variables added in JunosE Release 8.2.0.
Configures a limit on the admission bandwidth of outgoing interfaces (OIFs) containing
IPv4 or IPv6 mroutes, across different virtual routers, on a port. The no version removes
any OIF admission bandwidth limits.
portNumber—Port number in the form slot/port.
limitValue—Limit on the admission bandwidth (in bits per second) of outgoing interfaces
containing IPv4 or IPv6 mroutes, across different virtual routers, on a port. The default
is no limit.
priorityBandwidthValue— Minimum value of admitted priority bandwidth in bps. The
default is no limit.
hysteresisValue—Minimum priority bandwidth limit before the system evaluates mroutes
and admits any blocked OIFs; in the range 0-100 percent.
Global Configuration
Chapter 13: M Commands
1429