Frequency - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

frequency

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
frequency frequencyValue
no frequency
Command introduced before JunosE Release 7.1.0.
In RTR Configuration mode, sets the time interval between RTR operations. In SNMP
Event Manager Configuration mode, sets the frequency (in seconds) at which you want
MIB sampling to occur. The no version restores the default value.
frequencyValue—Number of seconds between RTR operations or MIB sampling
operations, depending on the configuration mode; with RTR operations, for both types
(echo and pathEcho), the default value is 60 seconds; with MIB sampling, the default
value is 600 seconds.
RTR Configuration, SNMP Event Manager Configuration
Chapter 7: F Commands
653