Discovery-Mode - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

discovery-mode

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] discovery-mode
Command introduced in JunosE Release 7.2.0.
Enables ANCP discovery mode. This mode allows RADIUS software to obtain loop
parameter information from a connected access node. If discovery mode is disabled, it
does not accept topology discovery messages and stops advertising topology discovery
capability. It does not affect any other neighbors. The no version disables ANCP discovery
mode.
L2C Neighbor Configuration
Chapter 5: D Commands
523