Ip Vrrp Enable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip vrrp enable

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip vrrp vrid [ enable ]
Command introduced before JunosE Release 7.1.0.
Enables a VRID. The no version disables a VRID. The default is disabled.
vrid—VRID identifier; a number in the range 1–255
Interface Configuration
Chapter 10: I Commands
971