JunosE 11.3.x Command Reference Guide A to M
mpls lsp no-route retries
Syntax
Release Information
Description
Options
Mode
1376
mpls lsp no-route retries retryNum
no mpls lsp no-route retries
Command introduced before JunosE Release 7.1.0.
Specifies the number of attempts that will be made to set up an LSP for RSVP-TE after
a failure due to no available route. The no version restores the default value, 0, which
means the attempts will be made until successful.
retryNum—Number of retry attempts in the range 0–65535
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?