Mpls Ldp Link-Hello Disable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls ldp link-hello disable

Syntax
Release Information
Description
Mode
1360
[ no ] mpls ldp link-hello disable
Command introduced before JunosE Release 7.1.0.
Suppresses the transmission of LDP link hello messages. This command requires the
use of targeted hello messages to form LDP peer adjacencies. The noversion restores
the default condition, where the LSR sends multicast link hello messages.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.