Ipv6 Policy-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipv6 policy-list

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] ipv6 policy-list policyName
Command introduced before JunosE Release 7.1.0.
Creates or modifies an IPv6 policy list. If you execute an ipv6 policy-list command and
type exit, the router creates a policy list with no rules, the default. When a policy list does
not have rules, the router inserts a default filter rule. Attaching this policy list to an interface
filters all packets on that interface. The no version removes a policy list.
policyName—Name of the policy list
Global Configuration
Creating Policy Lists for IPv6
Chapter 10: I Commands
1099