Map-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

map-list

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] map-list name
Command introduced before JunosE Release 7.1.0.
Creates a map list for an NBMA interface when configuring static mapping. The no version
removes the map list. Use in conjunction with the map-group command.
name—Name of the map list; a string of up to 31 characters
Map List Configuration
Chapter 13: M Commands
1259