Color-Mark-Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

color-mark-profile

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] [ ip | ipv6 | mpls ] color-mark-profile profileName
Command introduced in JunosE Release 7.2.0.
Translates the packet color (independent of its type) to a type-dependent mark (for ToS
or EXP), which is applied to a packet after it has exited a rate-limit hierarchy. If translation
is not configured for a color, then packets of that color are not changed. The no version
deletes the color-mark profile.
profileName—Name of the rate-limit profile to be used in a policy (up to 40
alphanumeric characters)
Color Mark Profile Configuration, Global Configuration
Hierarchical Rate Limits Overview
Policy Rule Precedence
Chapter 4: C Commands
439