Mpls Tunnel-Model - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls tunnel-model

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls tunnel-model { pipe | uniform }
no mpls tunnel-model
Command introduced before JunosE Release 7.1.0.
Specifies whether MPLS employs the pipe or uniform tunnel model for differentiated
services. The no version restores the default, the pipe model.
pipe-model—Specifies that the pipe model is followed
uniform-model—Specifies that the uniform model is followed
Global Configuration
Chapter 13: M Commands
1427