Ip Ospf Priority - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip ospf priority

Syntax
Release Information
Description
Options
Mode
884
ip ospf priority intfPriority
no ip ospf priority
Command introduced before JunosE Release 7.1.0.
Sets the router priority. Used in determining the designated router for the particular
network. This designation applies only to multiaccess networks. Every broadcast and
nonbroadcast multiaccess network has a designated router. The no version restores the
default value.
intfPriority—Priority value, an 8-bit number in the range 1–255; default value is 1
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.