Motd-Banner - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

motd-banner

Syntax
Release Information
Description
Mode
1328
[ no | default ] motd-banner
Command introduced before JunosE Release 7.1.0.
Controls display of a message-of-the-day banner (configured with the banner command)
on a particular line when a connection is initiated. The no version disables the motd
banner on the line; the motd banner is also disabled by the no exec-banner command.
The default version restores the default setting, in which the banner is enabled on all
lines.
Line Configuration
Copyright © 2010, Juniper Networks, Inc.