Debounce-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

debounce-time

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
debounce-time interval
no debounce-time
Command introduced before JunosE Release 7.1.0.
Sets the interval to wait before bringing up a RIP interface that was brought down. The
no version restores the default value, 10.
interval—Seconds in the range 0–60
Address Family Configuration, Router Configuration
Chapter 5: D Commands
477