Mpls Ldp Targeted-Hello Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls ldp targeted-hello interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls ldp targeted-hello interval seconds
no mpls ldp targeted-hello interval
Command introduced in JunosE Release 8.1.0.
Configures the the interval between targeted hello packets sent by LDP. This command
takes effect immediately. The no version restores the default value, 15 seconds.
seconds—Number of seconds, in the range 1–65535
Global Configuration
Chapter 13: M Commands
1371