Mpls Traffic-Eng - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls traffic-eng

Syntax
Release Information
Description
Options
Mode
1418
mpls traffic-eng level-1 | level-2
no mpls traffic-eng level-1 | level-2
Command introduced before JunosE Release 7.1.0.
Enables flooding of MPLS traffic-engineering link information into the specified IS-IS
level. Flooding is disabled by default. The no version disables flooding.
level-1—Floods IS-IS level 1
level-2—Floods IS-IS level 2
Router Configuration
Copyright © 2010, Juniper Networks, Inc.