Local-Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

local-interface

Syntax
Release Information
Description
Options
Mode
1228
local-interface { interfaceType interfaceSpecifier | ipAddress ipAddressMask }
no local-interface
Command introduced before JunosE Release 7.1.0.
Maps a domain name to a loopback interface. The no version deletes the mapping to
the user domain name.
NOTE: In Domain Map Configuration mode, this command is replacing the
deprecated loopback command for mapping a domain name to a loopback
interface. The loopback command may be removed completely from the
Domain Map Configuration mode in a future release.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
ipAddress—IP address of the loopback interface
ipAddressMask—IP address mask of the loopback interface
Domain Map Configuration
Copyright © 2010, Juniper Networks, Inc.