Logout Subscribers - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

logout subscribers

Syntax
Release Information
Description
Options
Mode
1248
logout subscribers { all | domain domainName | icr-partition icrPartitionId |
port interfaceSpecifier | username userName | virtual-router vrName }
Command introduced before JunosE Release 7.1.0.
icr-partition keyword and icrPartitionLocationId variable added in JunosE Release 10.3.0
Logs out the authenticated PPP or DHCP local server users. Also, logs out subscribers
based on the ICR partition ID. There is no no version.
all—Logs out all PPP or DHCP local server sessions.
domainName—Active PPP or DHCP local server session whose usernames have that
domain name.
icr-partition—Logs out subscribers based on the location ID of the partition in the ICR
cluster.
icrPartitionLocationID—A unique identifier for each ICR partition on a chassis; a maximum
of 128 characters. Note that this ID different from the partition ID, which is configured
using the ip vrrp vrid icr-partition partitionId command. The partition location ID that
you specify here is a combination of the interface within the chassis on which the ICR
partition is configured and the VRRP ID, which is system-defined and nonconfigurable.
interfaceSpecifier—Location of the port with active PPP subscribers; format varies
according to interface type; see "Interface Types and Specifiers" on page 5.
userName—Active PPP or DHCP local server session whose names match the username.
vrName—Active PPP or DHCP local server session whose interfaces are bound to a
specific virtual router.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.