Ip Multicast Ioa-Packet-Replication - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

Software for e series broadband services routers command reference a to m
Table of Contents

Advertisement

JunosE 11.3.x Command Reference Guide A to M

ip multicast ioa-packet-replication

Syntax
Release Information
Description
Options
Mode
858
ip multicast ioa-packet-replication interfaceType interfaceSpecifier
no ip multicast ioa-packet-replication
Command introduced in JunosE Release 7.3.0.
Enables IPv4 hardware multicast packet replication on port 8 of a high-density Ethernet
I/O module or IOA. The no version disables hardware multicast packet replication.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents