Ip Analyzer - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip analyzer

Syntax
Release Information
Description
Options
Mode
Related
Documentation
738
ip analyzer [ default ]
no ip analyzer
Command introduced before JunosE Release 7.1.0.
Configures an interface as an analyzer interface, for use in an interface mirroring
configuration. The no version removes the analyzer interface configuration from the
interface.
default—Specifies that this interface is the default analyzer interface for the virtual
router
Interface Configuration
Configuring CLI-Based Mirroring
Configuring RADIUS-Based Mirroring
Copyright © 2010, Juniper Networks, Inc.