Mpls Tunnels Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls tunnels profile

Syntax
Release Information
Description
Options
Mode
1428
[ no ] mpls tunnels profile profileName [ disable ]
Command introduced before JunosE Release 7.1.0.
Creates or disables a tunnel profile for MPLS. The no mpls tunnels profile version deletes
the tunnel profile. The no mpls tunnels profile disable version reenables tunnels previously
disabled.
profileName—Name of a tunnel configuration profile used for MPLS tunnels
disable—Disables all tunnels associated with the profile
Global Configuration
Copyright © 2010, Juniper Networks, Inc.