Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

key

Syntax
Release Information
Description
Options
Mode
1140
To assign a RADIUS key:
key secret
no key
To assign a RADIUS relay key:
key ipAddress ipMask relaySecret
no key ipAddress ipMask
To assign an ISAKMP/IKE key:
key keyString
no key
Command introduced before JunosE Release 7.1.0.
From RADIUS Configuration mode, specifies the secret for the RADIUS authentication,
accounting, dynamic-request server, or preauthentication server that is used to calculate
the RADIUS authenticator field during exchanges with the RADIUS server. The no version
removes the secret and causes the router to drop all requests for the RADIUS client.
From RADIUS Relay Configuration mode, specifies the IP address and mask of the network
that will use the relay authentication or accounting server, and the secret used during
exchanges between the RADIUS relay server and client. The no version removes the
secret.
From IPSec Manual Key Configuration mode, configures a manual ISAKMP/IKE preshared
key. There is no no version. To delete a key, use the no version of the ipsec key manual
command.
secret—Authentication, accounting, dynamic-request, or preauthentication server
secret text string used by RADIUS to encrypt the client and server authenticator field
during exchanges between the router and a RADIUS server. The router encrypts PPP
PAP passwords using this text string.
ipAddress—IP address for client network
ipMask—IP mask for the client network
relaySecret—Text string; up to 32 characters
keyString—Key value in ASCII format; up to 200 characters
IPSec Manual Key Configuration, RADIUS Configuration, RADIUS Relay Configuration
Copyright © 2010, Juniper Networks, Inc.