mpls copy-upc-to-exp
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] mpls copy-upc-to-exp
Command introduced in JunosE Release 7.1.0.
Sets the initial value of the EXP bits in pushed or swapped labels to the user packet class
value associated with the packets. This command does not modify EXP bits in labels
already in the received MPLS packet. The no version restores the default condition, where
the EXP bits are set to 000 (for non-MPLS/IP traffic) or to the IP precedence value from
the TOS field of the IP packet header (for IP traffic).
Global Configuration
Chapter 13: M Commands
1337