Ipv6 Pim Join-Filter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 pim join-filter

Syntax
Release Information
Description
Options
Mode
1088
ipv6 pim join-filter accessListName
no ipv6 pim join-filter
Command introduced before JunosE Release 7.1.0.
Specifies an extended access list that you want this PIM router or PIM interface to use
as a join filter. If an interface-level filter exists, it takes precedence over the global-level
filter. The no version removes the filter association.
accessListName—Name of the access list that you want this interface to use as a PIM
join filter; a string of up to 32 alphanumeric characters
Global Configuration, Interface Configuration
Copyright © 2010, Juniper Networks, Inc.