Line-Card Switch - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

line-card switch

Syntax
Release Information
Description
Options
Mode
1218
line-card switch primarySlotNum
Command introduced in JunosE Release 11.3.0.
Enables a switchover to the secondary line module in a high availability pair of line
modules, when the primary line module stops functioning or encounters a fault. A
switchover to the secondary module occurs only if you previously activated line module
high availability on the router using the mode high-availability slot command. There is
no no version.
primarySlotNum—Number of the slot in which the line module configured as the primary
resides in the router; for the E120 router, a number in the range 0–5; for the E320 router,
a number in the range 0–5 or 11–16
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.