License L2Tp-Session - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

license l2tp-session

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
license l2tp-session licenseKey
no license l2tp-session
Command introduced before JunosE Release 7.1.0.
Specifies the L2TP license key provided by your sales representative or Juniper Networks
Customer Service. You can use the license on ERX1440 routers, E120 routers, and E320
routers to increase the number of supported L2TP sessions from 16,000 to 32,000. The
no version removes the license.
NOTE: This command is deprecated and might be removed completely in a
future release.
JunosE Software no longer requires you to configure a license to enable
support for 32,000 L2TP sessions. The ERX1440 routers, E120 routers, and
E320 routers support 32,000 L2TP sessions by default; all other models
support a maximum of 16,000 L2TP sessions.
Although the license l2tp-session command remains in the CLI, the command
has no effect on the actual enforced limit.
licenseKey—Unique string of alphanumeric characters that we provide to you
Global Configuration
Chapter 12: L Commands
1211