Ip Igmp Static-Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip igmp static-group

Syntax
Release Information
Description
Options
Mode
832
[ no ] ip igmp static-group groupAddress
Command introduced before JunosE Release 7.1.0.
Assigns an interface to handle all multicast traffic for a group. The interface sets no timers
for this group. The no version removes the group from the interface.
groupAddress—Address of the group
Interface Configuration, Profile Configuration
Copyright © 2010, Juniper Networks, Inc.