Medium Ipv4 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

medium ipv4

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
medium ipv4
no medium
Command introduced before JunosE Release 7.1.0.
Specifies the medium type of a tunnel to IPv4 (the only medium type currently supported).
The no version restores the default value, ipv4.
Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration
Chapter 13: M Commands
1303