Login - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

login

Syntax
Release Information
Description
Mode
1246
[ no ] login
Command introduced before JunosE Release 7.1.0.
Requires you to log in with a password. The no version removes the password requirement
and allows connections without a password.
NOTE: If you issue this command when no password has been configured,
access to Telnet is refused.
Line Configuration
Copyright © 2010, Juniper Networks, Inc.