Mroute Port Limit - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mroute port limit

Syntax
Release Information
Description
Options
Mode
1430
mroute port portNumber limit limitValue
no mroute port portNumber limit
Command introduced before JunosE Release 7.1.0.
Configures a limit on the number of outgoing interfaces (OIFs) containing IPv4 or IPv6
mroutes, across different virtual routers, on a port. The no version removes any OIF port
limits.
portNumber—Port number in the form slot/port.
limitValue—Limit on the number of outgoing interfaces containing IPv4 or IPv6 mroutes,
across different virtual routers, on a port. The default is no limit.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.