L2Tp Retransmission - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

l2tp retransmission

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
l2tp retransmission retries [ established | not-established ]
no l2tp retransmission [ retries ] [ established | not-established ]
Command introduced before JunosE Release 7.1.0.
Sets the number of retransmission retries, and allows you to apply the retry count to
established and/or unestablished tunnels. If you do not include a keyword, the router
applies the retry count to all tunnels. The no version resets the number of retransmissions
to the default value, 5.
retries—Number in the range 2–30
established—Applies the retry count only to established tunnels
not-established—Applies the retry count only to tunnels that are not established
Global Configuration
Chapter 12: L Commands
1179