mpls traffic-eng administrative-weight
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls traffic-eng administrative-weight weight
no mpls traffic-eng administrative-weight
Command introduced before JunosE Release 7.1.0.
Specifies the administrative weight for the interface. The no version restores the default
value, which matches the IGP-determined weight (cost).
weight—Administrative weight, a value in the range 0–4294967295 supersedes any
weight conferred upon the link by the IGP
Interface Configuration, Subinterface Configuration
Chapter 13: M Commands
1419