Metric-Style Wide - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

metric-style wide

Syntax
Release Information
Description
Options
Mode
1312
[ no ] metric-style wide [ transition ] [ level-1 | level-2 | level-1-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the router to generate and accept only new-style IS-IS TLVs with wider metric
fields. If you issue this command, the value configured with the isis metric command can
range from 0–16777215. The no version restores the default value, which is to generate
and accept only old-style TLVs with narrow (six-bit) metric fields.
transition—Configures the router to additionally accept old-style TLVs with narrow
(six-bit) metric fields
level-1—Configuration applies only to level 1 routing
level-2—Configuration applies only to level 2 routing
level-1-2—Configuration applies to both level 1 and level 2 routing
Router Configuration
Copyright © 2010, Juniper Networks, Inc.