L2Tp Destination Lockout-Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

l2tp destination lockout-timeout

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
l2tp destination lockout-timeout timeOutValue
no l2tp destination lockout-timeout
Command introduced in JunosE Release 7.2.0.
Specifies the amount of time an L2TP destination remains in the lockout state after the
destination becomes unavailable. When the timeout period expires, the router either
begins the lockout test procedure (if configured to do so) or immediately returns the
destination to service. The no version restores the default lockout timeout value.
timeOutValue—Number of seconds in the range 60–3600; default is 300 seconds (5
minutes)
Global Configuration
Chapter 12: L Commands
1155