Committed-Rate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

committed-rate

Syntax
Release Information
Description
Options
Mode
Related
Documentation
444
committed-rate { rate | parameterName percentage percentValue }
no committed-rate
Command introduced before JunosE Release 7.1.0.
parameterName and percentValue variables added in JunosE Release 8.1.0.
Sets the committed rate for a rate-limit profile as a specified value or as a percentage
of a reference rate defined in the specified policy parameter. The no version restores the
default value, 0.
rate—Rate in bits per second in the range 0–4294967295
parameterName—Name of policy parameter up to 40 characters
percentValue—Percentage in the range 0–100
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Setting the Committed Rate for a Rate-Limit Profile
Copyright © 2010, Juniper Networks, Inc.