Ip Igmp Query-Max-Response-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip igmp query-max-response-time

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip igmp query-max-response-time tenthsOfaSecond
no ip igmp query-max-response-time
Command introduced before JunosE Release 7.1.0.
Specifies the period in tenths of a second during which the host is expected to respond
to an IGMP query. IGMP version 2 includes this value in IGMP query messages sent out
on the interface. You cannot set this value on interfaces running IGMP version 1. The no
version restores the default value, 100 tenths of a second (10 seconds).
tenthsOfaSecond—Time interval between receipt of an IGMP query and the response;
in the range 1–254 tenths of a second.
Interface Configuration, Profile Configuration
Chapter 10: I Commands
827