Lacp Port-Priority - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

lacp port-priority

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
lacp port-priority portPriority
no lacp port-priority
Command introduced before JunosE Release 7.1.0.
Sets the priority for an Ethernet member link, also known as an Ethernet port, in an IEEE
802.3ad link aggregation group (LAG) bundle. The member link with the lowest numerical
priority value has the highest priority. The Ethernet member link with the highest priority
is selected first to join the LAG bundle. The no version restores the default priority value,
32768.
portPriority—Priority value; integer in the range 0–65535; default value is 32768
Interface Configuration
Chapter 12: L Commands
1203