Max-Response-Failure - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

max-response-failure

Syntax
Release Information
Description
Options
Mode
1294
max-response-failure maxFailureValue
no max-response-failure
Command introduced before JunosE Release 7.1.0.
Terminates a test when the maxFailureValue is reached. That is, when there is no response
to a designated number of operation requests, the test is terminated. This feature applies
only to pathEcho entries. The no version restores the default value, five consecutive
failures.
maxFailureValue—Number of operation requests not responded to; 0 turns this feature
off; default value is 5
RTR Configuration
Copyright © 2010, Juniper Networks, Inc.