Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual page 734

JunosE 11.3.x Command Reference Guide A to M
id
Syntax
Release Information
Description
Options
Mode
690
[ no ] id neighborId
Command introduced before JunosE Release 7.1.0.
Specifies the ANCP neighbor ID in the L2C Neighbor (config-l2c-neighbor) Configuration
mode. The no version removes the neighbor ID.
neighborId—ANCP neighbor ID (MAC address) in the form XXXX.XXXX.XXXX
L2C Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.