Table of Contents
Advertisement
domain-tag
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
domain-tag routeTag
no domain-tag
Command introduced before JunosE Release 7.1.0.
Sets the VPN route tag for an OSPF VRF on a PE to prevent routing loops back into the
VPN. The no version restores the default value.
routeTag—Number identifying the VPN route tag in the range 0–4294967295
The default value is a 32-bit number based on the AS number of the BGP/MPLS VPN
backbone, with the first 16 bits set to 1110 0000 0000 0000, followed by the 16 bits
representing the AS number.
Router Configuration
Chapter 5: D Commands
541
Advertisement
Table of Contents
